DMR Radio ID

The Radio ID Database

The Motorola Amateur Radio Club World Wide Network has been in existence for many years. MARC was the first organization to get a foothold in the amateur radio world and as such, had at one time become the defacto owner of radio and repeater DMR IDs. The DMR-MARC network started out as a 100% Motorola equipment repeater network and has since grown to include a few other brands as well.

You can find out much more about DMR-MARC and its history here.

DMR-MARC is no longer the custodian or keeper of Radio IDs.  It is now the sole purpose of to manage IDs for the World of DMR.

What Is A DMR Radio ID?

A Radio ID is a unique number assigned to you (and your callsign) by the Team. Like a telephone number or IP address, your Radio ID identifies you as a unique radio user on the various DMR networks and repeaters around the world. Because DMR is digital, we have so much more that we can do with the RF flowing to and from our radios. For example, because of Radio IDs we can see and display the callsign of the person talking to us on the radio face by the use of the Database. Every time you PTT your DMR radio, your Radio ID gets transmitted to the DMR network and everyone can see who you are.  Pretty cool, right? BUT DON’T FORGET.. YOU MUST STILL ID BY VOICE TO BE LEGAL! Even though your callsign shows up in the network logs and on other users radios does not mean you are identifying yourself a licensed ham. You must ID like you do on analog.

So why else is this so cool? Identifying every radio and repeater uniquely with an ID enables the very essence of DMR networking to function. i.e making private calls to each other, organizing specific talkgroups for countries, states, regions, cities, clubs, special interest groups etc.

In short, a Radio ID enables you to talk to and hear only the people and traffic that you want to.

It’s totally free to get your Radio ID and you NEED ONE if you are going to have a DMR radio and use it. Is it the law? No. But you aren’t going to enjoy using DMR unless you have one, so do yourself a favor and get registered with as soon as you buy a DMR Radio.

How Do I Get A Radio ID?

It’s easy to register with and get your own Radio ID.  Just click the button below, read the entire page to understand what you are about to do, then click the USER REGISTRATION button at the bottom of the page.

That’s it. You will receive an email, usually within 24 hours, with your unique Radio ID, which you can promptly program into your radio(s).

*** You DO NOT need a Radio ID for each DMR radio that you own.

Since you are only transmitting on one radio at a time, your assigned Radio ID should be programmed the same in each radio that you use. Remember the Radio ID is identifying the USER on the network and not the actual equipment.REQUEST A RADIO ID

DMR Repeater ID

Now we are getting a bit more complicated and need to talk in much more depth about joining a DMR network with a peer repeater. We’ll go into those details on another dedicated page.

BUT, the process for obtaining a Repeater ID is the same as requesting a Radio ID, you’ll just click a different button on the bottom of the DMR Registration page.

If you think you are ready for such a thing, click the button below.REQUEST A REPEATER ID

DMR Networks

Now that you have a unique Radio ID you are ready to use your radio on a DMR Network. There are several networks out there, but there are two that own most of the market share, so to speak. C-Bridge on the MARC Network and Brandmeister, which is quickly gaining ground.

Both networks are very large, with hundreds of repeaters networked together around the globe and thousands of users using them.

We’ll go into much more depth discussing each of these networks separately on their own dedicated pages. There are many similarities between how the two function, but a few major differences as well.

Your Personal ID Database

Most all DMR radios include their own internal database for holding “digital contacts.” This is another way of saying.. a database for your personal copy of registered Radio IDs translated into actual amateur radio callsigns.

This is the functionality that allows you to display another user’s callsign on your display when they are using the DMR system.

We’ll need to go into this in more depth later, but essentially you can build your own Conacts list for converting Radio IDs into callsigns.

Posted in DMR

Deja un comentario